Procart Extraction Spray Booth Filter Specification Sheet:
(If you cannot see the preview, please refresh the browser or press Ctrl + F5 on your keyboard)

To view, download or print in a different window, please click here

Our PROCART I spray booth filter enjoys the same superior quality of manufacture that makes it ideal for the vast majority of paint in nearly all types of spraybooth but with the added security of being NON-FLAMMABLE.  As with all filters within our Procart range, the folded design ensures a high holding capacity, maintains maximum airflow and gives you a very strong filter.  These spraybooth filters will ensure your product finishing area is filtered effectively.

Our Procart spray booth filters are used in around 85% of our customers spraybooths and are designed to handle both water-based and all types of solvent paints, but not powder paints or dust (for this we recomment the use of our Procart M, H or HS filters).  The paint overspray is captured in the folds of the filter both on the face and inside the folds, whilst the filtered air is allowed to pass through easily until the filter is full.  This ensures a constant airflow is maintained for much longer than when using other types of extraction filtration.  Our Procart I is no different with regards to the filtering but the special coating ensures that an added level of safety is in place especially when using solvent based paints or when spraying within high risk areas.

If you are looking to spray powder or very dry or dusty paints, or if you feel that your spraybooth may suffer from a high percentage of overspray or you are experiencing problems with dust or paint travelling through your ducting and ending up outside of your factory, then you may want to look at the other options within our filtration range. Please feel free to call us on 01673 895130 or email us for further assistance.

  • DEPTH: 55mm
  • RECOMMENDED AIRSPEED: 0.5—1 m/s
  • PRESSURE DROP: 13 PA at 0.5 m/s
  • LOSS OF AIRSPEED AT NEW: 0.5mm for 0.75 m/s (4.91 PA)
  • MAXIMUM LOSS OF AIRSPEED: 9.0mm for 0.75 m/s (88.3 PA)
  • DIMENTIONS: (Standard Procart IB) 1x10-metres (240 folds)
  • If you are not sure how to remove & replace your spray booth filters then watch our Procart Filter Replacement Tutorial.

    Procart IB - NON FLAMMABLE

    Spray Filters - PROCART IB non-flammable spray booth filter

    Choose from available size options

    • Product Code: FI:CA:PR-0020-0075
    • Availability: In Stock
    • £37.50


    All prices are quoted net of VAT


    Available Options


    Tags: paint filter, procart IB

    Proco

    Proco

    Coagulant and biocide for all types of paint especially solvent based and powder paints. ..

    £40.00

    Promedia T15

    Promedia T15

    White G2 synthetic filter roll. Has many uses in and around your spraybooth and production area. ..

    £37.99

    Pleated Panels - Finepleat M6 - 12x12x4 inch (12 pack) - app 287x287x95 mm

    Pleated Panels - Finepleat M6 - 12x12x4 inch (12 pack) - app 287x287x95 mm

    Pleated Panels - Finepleat M5 - 12 x 12 x 4 inch (12 pack) - app 287 x 287 x 95 mm 12 pack of ple..

    £207.99

    IK Multi Hand Sprayer - 1 litre

    IK Multi Hand Sprayer - 1 litre

    Our 1 litre hand compression sprayer can be used with most chemicals, as well as general products ar..

    £12.75

    Proprep - 20 metre roll

    Proprep - 20 metre roll

    Proprep is normally used as either a secondary filter for air extraction or alternatively to filte..

    £37.99