Mesto 3565 & 3595 Metal Compression Sprayers
Mesto 3565 & 3595 are both 5-litre capacity compression sprayers with a 6 BAR maximum spraying pressure and a maximum flow rate of 4.5-litres per minute. The 3565 has a yellow coated, mild steel tank whilst the tank of the 3595 is constructed from stainless steel.
The Mesto sprayers are packaged, as usual, in brightly coloured boxes with plenty of good quality, informative photos and basic information and is of a construction that felt strong enough to both hold and give some decent protection to the contents. I like the way that the box lid is cut so that it can form a handle. A nice touch.
Upon opening the box, I look for the instruction manual and with these sprayers we get not one but two. The first is more of a leaflet which opens out and gives technical information on metering and spraying rates. It looks very technical but is very informative and a reminder that these sprayers are intended to be used, not just by amateurs but, but professionals. The main instruction manual is printed in six languages so the 47 pages are not of interest to many of us but the 7 that are printed in English tells you everything that you need to know from a welcome message and safety notices through technical information, assembly instructions, care & maintenance information and a faults guide.
Having had a quick read, I decided it was time to have a look at the sprayers themselves. Everything was nicely packed around the tank so to remove the sprayer from the box only required the hose to be put to one side, a gently pull on the tank handle and the sprayer lifted easily from the box. My first impression of the 3595 is that stainless steel makes for a really, very impressive looking tank. The 3565 has a yellow, polyester coating which, whilst not as attractive as the stainless steel, still looks bright and does make the printed markings stand out well. I like the brass lance and nozzle and the coiled 2.5-meter hose. The coiled hose reduces the hose length to around 30cm so this is a nice space saving idea which also means that you are not going to get caught up in a long hose. The sprayer itself has three storage holes for lances, a nice big tank handle, pressure release valve, pressure gauge and small storage compartment. These last three are all recessed into the top of the sprayer which kept nice sight lines. This is not important when it comes to the operation of the sprayer but, I feel, it does show that time has been taken to design a sprayer that isn’t just effective but also looks good.
After skimming through the instruction manual, the assembly didn’t look very difficult. There are only three parts to attach to the tank; the shoulder strap, coiled hose and lance. The hose and lance handle are already connected to each other so one less job to do. The padded shoulder strap is fed through the two slots in the rear of the sprayer and whilst a little fiddley, it only took me a few moments to fit. The lance is easily threaded onto the lance handle and the hose screws into the base of tank. TIP: There is a small lock that, when pushed into place, stops the hose from accidentally unscrewing. I would suggest that it is a good idea to use it.
The assembly only took a few minutes and wasn’t difficult. Remember that there are plenty of diagrams and instructions to help you so if something doesn’t make sense then go back to the instruction manual.
I was now ready to start spraying so I placed the tank on the floor and turned the tank handle anticlockwise and after a few turns pulled the central housing from the tank which allowed me to start filling. The design incorporates a nice wide filling area so spillages should be easy to keep to a minimum. I had no issues filling the tank so replaced the housing and gently tightened it. I only needed to pump the tank handle a few times to bring it to full pressure and spraying was just as I would expect; a nice spray pattern was easily maintained. To release the pressure within the tank simply pull the small, red pressure release valve.
Draining of the tank was easy as the hose it attached at the base so, if you wish, you can simply unscrew the hose and the tank will fully drain. Or you can just remove the central housing and empty any contents that way.
TIP: The brass thread, on the lance handle, that the sprayer lance attaches to can be unscrewed which will reveal a larger thread. This larger thread is required should you wish to use telescopic lance extensions or many other types of attachment.
I would class the 3595 & 3565 as top quality, compression sprayers that are designed to be used by both amateurs and professionals alike. The 6 BAR maximum working pressure and the option to pressurise via compressed air (with the addition of a valve) mark these sprayers apart from much of the competition. Metal tanks are very robust and look great.
Our range of MESTO sprayers give you an even greater choice of quality compression and backpack sprayers that can be used by professional and amateurs alike. This sprayer is constructed from stainless steel - an extremely robust and attractive unit:
- Unit Height: 0.5m - approximate footprint dimensions are 270 x 240mm
- Unit Weight: 4.3kg
- Operating Pressure: 6 BAR (88 psi)
- Maximum Fill: 6 litres
- Tank Capacity: 9 litres
- Tank Material: Stainless Steel
- Carry Position: Shoulder (can be used with optional sprayer backpack below)
- Maximum Flow: 0.78 litres/min @ 6BAR
- Seals: FPM (Viton®)
- Spray wand: Brass 50 cm which can be rotated 360°
- Nozzle: Brass flat jet nozzle with fine filter
- Hose: Spiral design with maximum reach of 2.5m and supplied with safety interlock
• Safety valve and pressure gauge are exchangeable
• Spare parts compartment on the device
• Pump holder
• Spray and extension wand bracket
• Funnel cover
• Extension wands up to 300 cm
• Shut-off valve, brass
• Compressed air filler valve
• Additional compressed air filler valve
• PTFE discharge equipment (Teflon® discharge equipment)
• Transport trolley - view online
• Quiver with fleece
This unit is designed to be used with many types of different liquid including many mosskillers, weedkillers, alkaline products (pH = 9), plant protection products, forming oils, low viscosity mineral oils. It should not be used with any combustible, corrosive (certain disinfecting and impregnating agents, acids and bases) or solvent based liquids. If you are uncertain of the compatability of this unit with any of our products then please contact us for confirmation of suitability.
|Maximum Operating Pressure||6 BAR (87 psi)|
|Total capacity||6 L|
Mesto 3595P / 3615P Stainless Steel Compression Sprayer
Stainless Steel - 6 BAR maximum pressure
- Brand: Mesto Sprayers
- Product Code: AM:SP:UN-1211-0001
- Availability: In Stock