ECO-Klean - Degreaser 10 litres

New generation, solvent free degreasing liquid for all types of surface

Read More

Product code

0191

Each £38·00 exc VAT
Total £38·00 exc VAT

Eco-Klean is a new generation degreaser without nitrites so inert on fragile surfaces - non residual on ferrous and non ferrous metals, so can be followed by paint or treatment.

Its detergent and emulsifying action enables the degreasing and cleaning of surfaces with grease, sludge, different oils, general dirt etc without degradation of materials such as plastic, polycarbonate, composites, epoxy, polyester, polyurethane, glass, thermosetting organic polymers.

Eco-Klean is the alternative to petroleum solvents and is particularly efficient for degreasing mechanical parts before paint or any support requiring a completely clean surface free from grease.

Eco-Klean is non corrosive, non caustic, non aggressive for the operator and the environment with a low level of VOCs. (Volatile Organic Compounds).


Eco-Klean can be applied to your surfaces in a number of ways to best suit your requirements. You can apply with a brush or cloth, use a dip tank or pressure washer. If you are planning to use Eco-Klean to degrease larger parts then applying with our specialist 10-Litre Cleaner Sprayer or 5-Litre Cleaner Sprayer makes for quick and easy application before being wiped or washed from the surface.

  • Appearance - Liquid
  • Density @ 20oC - 1
  • pH - 8
  • Surfactants - Non ionic


DEGREASING MECHANICAL PARTS BEFORE PAINTING:

  • Cloth or brush
  • Diluted 10-15% in water
  • Ambient temperature
  • No rinse required

STANDARD DEGREASING OF PARTS:

  • Cloth, brush, tank or low-pressure hose/sprayer
  • Diluted 15-50% in water
  • Ambient temperature
  • Contact time of 2-10 minutes when using in a tank
  • No rinse required

ULTRASOUND TANK

  • No dilution
  • Temperature 30-60oC
  • Contact time of 2-10 minutes
  • No rinse required

HIGH PRESSURE WASHER

  • Diluted 1.5-2% at nozzle tip
  • Temperature 40-60oC
  • No rinse required

I currently use thinners to degrease. Why is this better?

There are a number of reasons why Eco-Klean is superior to using thinners, the two main reasons are that thinners is not a degreaser and Eco-Klean doesn't contain solvents. Whilst thinners will make a surface wet and allow you to wipe off some dirt, it is really just wetting the dirt and all you are doing is moving the dirt around. Eco-Klean, however, is a powerful degreaser which means that you will be removing oil from the surface, leaving it clean and ready for whichever process you then require.

What is the best way to apply Eco-Klean?

The best method of application depends upon what you are treating and where. If you are cleaning small pieces then wiping with a cloth or a dip tank would be be a good options; for very large pieces a pressure washer could save you a lot of time. There is also the option of using one of our Cleaner range of specialist compression sprayers which will allow for easy and precise application. Whether your items are large or small, the application of Eco-Klean is versatile so you can be sure of the best results.


View Specs